Place your Melt & Pour Soap base on a flat surface and using your knife cut it into 1 inch cubes. I cut about 10 cubes for 2 full bars of soap.

Place your cut cubes into your bowl and place in the microwave for 35 seconds. Once the cycle is finished remove from the microwave and give it a quick stir to make sure all the cubes are melted down to liquid. This is a great time to add in some essential oils if you want. I would add him some lavendar. You can read about how to buy essential oils here.

Place your molding tray on a flat surface and add a drop of red and a drop of green on the base cof the mold.

Now quickly pour your soap into the molds filling up each cavity to the top.

Once your molds are filled grab your soap colorant and drop in a color of red, blue, green and yellow and quickly using your stick/straw start to swirl the design around.

You’ll notice the color starts to sink to the bottom and then comes back to the top. This is creating the tie dye effect at the bottom.

Spritz the tops of your soaps with rubbing alcohol to get rid of any air bubbles

Allow to sit in mold for at least 2 hours.

Remove soap from mold and enjoy.