Go Back
Print

DIY Dog Bed

This DIY Dog Bed is super easy to make with step-by-step instructions using pillows and fleece.  It is so easy to remove and clean making this a great dog bed.
Prep Time10 minutes
Active Time1 hour
Total Time1 hour 10 minutes
Keyword: DIY Dog Bed
Author: One Crazy Mom

Equipment

  • fleece material (size info below)
  • 2 king size pillows (17" x 36")
  • Sewing Machine
  • Thread
  • pins
  • measuring tape
  • marking pen
  • Scissors

Instructions

How to make a dog bed:

  • First, measure your pillows. The measurement is typically on the bag of the pillow, so it's easiest to just read that!
  • One pillow measures 17" x 36", so two pillows will measure 34" x 36".
  • You will need a piece of fleece 36" wide x 78".
  • This measurement was determined by adding the length of 34" for the front and 34" for the back and adding 5" to each end. (34" + 34" + 5" + 5"). Trim the rough edges of the fleece with scissors and discard.
  • Measure your fabric and mark it with a marking pen. Cut the fabric to size.
  • Fold over the two short, 36" ends about 1/2" and pin. Stitch a straight stitch across each end. Trim excess thread.
  • Lay your fabric on a large surface and fold it, right side facing in, into a 34" x 36" rectangle. Your stitched ends will be in the center and they will overlap about 5" each.
  • Pin each open side together and stitch with a 1/2" seam allowance. Trim excess thread.
  • Turn the cover right side out! Stuff with pillows and you're ready to use!
  • To wash: follow manufacturers directions on the pillows and the fabric.
  • You will love being able to easily wash this dog bed. It is super easy and not a hassle at all like some beds can be.
  • The pillows are easy to remove and the cover isn't difficult to remove and wash. You can also wash the pillows according to the manufacturing instructions.
  • You may find that the cover needs to be washed more and that can just be tossed in the wash for a quick cleaning.

How to make a dog bed without sewing:

  • What if you don't sew? No problem at all! You can use iron hem tape to easily do this without any sewing.
  • This is a great option for those that do not sew. You can still get the same great results but without using a sewing machine.

Notes

Tips for diy dog bed:
This diy pet bed is perfect to just place on the floor. However, you can also make it to fit inside in existing dog bed or wooden crate. Maybe you want to replace the pillow inside a dog bed but the frame is still in good condition.
This is the perfect DIY to just make a new dog bed pillow for your furry friend. We have even made extras to put in the dog crate. If you like to shop at the thrift store, you can often find pet bed frames. Grab one for a deal and just make a new pillow following these easy instructions.
We used king size pillows but if you have small dogs, use standard size pillows.
This DIY is so easy to adjust and modify for what your needs are. Give it a try!